ASSORTIMENT

Digitale componenten

Een verzameling van verschillende digitale producten, o.a.; indicators, displays, dataloggers, relay outputs, power supply’s, overvaltage protection & signal converters.

The indicator is typically used to give an additional local reading when carrying out remote measurement of absolute or relative pressures.

The programmable PMS-620N indicator is applicable to cooperation with the transmitters having a standard input current and voltage signals

* 4 × 20 mm red LED display Universal measuring input
* 4...20mA, 0...20mA or 0...10V
* Two relay outputs: 1 A, 230 V AC
* RS-485 digital output
* Integrated power supply 24 V DC Wall mounted casing

The WW-11ALW digital indicator is designed to be used with any device with a 4...20 mA.

* Backlight display 5 × 10 mm
* Current input 4...20 mA
* Aluminum, wall or pipe mounted casing
* IP66
* Intrinsic safety certificate

The industrial data logger PMS-90R is designed to record and display current values as well as to present technological parameters in the form of graphs.

* Up to 8 inputs 0/4 20mA or PT100/PT500/PT1000
* 1 digital input for recording release
*2 relay outputs in standard (optoMOS)
* USB Host port for flush data storage
* RS-485 / Modbus RTU
* Power supply 19V ÷ 50V DC, 85 ÷ 260V AC Free configuration and recording software

3.5"/5.7 TFT, 320 x 240 pixels, touchscreen navigation

* compact multichannel controller with data logging capabilities
* analog / digital / universal inputs
* thermocouple / RTD inputs
* counter / flowmeter / ratemeter inputs
* current or relay / SSR outputs
* USB Host port for flush data storage
* free configuration and recording software
* 3.5"/5.7 TFT, 320 x 240 pixels, touchscreen navigation

The programmable digital indicator model PMS-770T is a panel meter for a wide range of industrial applications.

* Universal measuring input
* 4...20 mA, 0...20 mA or 0...10 V ü 4 relay outputs: 1 A, 230 V AC
* 4×9 mm LED display + 20-point bargraph
* Integrated power supply 24 V DC
* Fully isolated passive current output 4-20mA

Programmable PMS-920, PMT-920 indicators are applicable to cooperation with the transmitters having a standard current or voltage output signal.

* 4...20 mA or 0...20 mA current input (PMS-920)
* 0...5V, 1...5V, 0...10V, 2...10V voltage input (PMS-920)
* Pt100 - resistant input (PMT-920)
* Two settable relay outputs: 1 A, 230 V AC
* Power supply 230 V AC (optional 24V AC/DC) Integrated power supply 24 V DC

The programmable PMS-970P indicator is applicable to cooperation with the transmitters having a standard current or voltage output signal.

* Universal measuring input
* 4...20 mA, 0...20 mA or 0...10 V ü 4 relay outputs: 1 A, 230 V AC
* 4 × 20mm red LED display
* Integrated power supply 24 V DC
* Additional options:
** Power supply 24V AC/DC
** passive current output
** RS-485 digital output

The ZL-24-01 power supply is used with a 230 V, 50 Hz AC network supply to power devices requiring direct current

* Output power supply 2x24 V DC
* Maximum output current 2 × 50 mA
* Indication of presence of output voltage
* Permanently resistant to short circuits and excess voltage
* Casing can be fitted on a standard rail (TS35, TS32)

The ZL-24-08 power supply is typically used with a 230 V, 50 Hz AC network supply to power devices requiring direct current.

* Maximum output current 800 mA
* High energy efficiency
* Indication of the presence of output voltage
* Permanentlyresistant to short circuiting and excess voltage
* Overvoltage protection Casing can be fitted on a standard rail (TS35, TS32)

The ZSP-41 provides galvanic separation of an input signal (4 ÷ 20 mA, 0 ÷ 20 mA, 0 ÷ 10 V, 0 ÷ 20 V) and converts it.

* Full galvanic separation of circuits (IN-OUT, IN-SUP, OUT-SUP)
* Ability to select input and output signals
* Ability to use input line to power a two-wire transmitter
* Casing can be fitted on a standard rail (TS35)

The SP-11 signal isolator provides galvanic isolation of an input current or voltage signal and converts it.

* Single circuit or dual circuit version in 12,5 mm wide casing
* Opto-electronic galvanic separation (IN-OUT)
* Ability to select input signal
* 9...36 V power supply in the output signal loop
* Casing can be fitted on a standard rail (TS35)

The SP-11 signal isolator provides galvanic isolation of an input current or voltage signal and converts it.The ZS-30Ex1 power supply and isolator is a partially intrinsically safe device with an external (input) intrinsically safe circuit.

* Ex-rated intrinsically safe Full galvanic separation of circuits (IN-OUT, IN-SUPPLY, OUT-SUPPLY)
* Accuracy 0,1%
* Casing can be mounted on a standard TS35 rail

The ZS-31Ex1 power supply and isolator is a partially intrinsically safe device with an external (input) intrinsically safe circuit.

* Ex-rated intrinsically safe
* Full galvanic separation of circuits (IN-OUT, IN-SUPPLY, OUT-SUPPLY)
* Accuracy0,1%
* Casing can be mounted on a standard rail (TS35, TS32)

The UZ-2 protection circuit is designed to provide overvoltage protection for measurement transmitters and auxiliary devices.

The SP-02 signal isolator provides galvanic separation of an input signal (0/4...20 mA) and converts it

* Single circuit or dual circuit version in 12,5 mm wide casing
* Accuracy 0,16%
* Casing can be fitted on a standard adapter (TS35)

SPECIFIEKE INFORMATIE OVER ONS BEDRIJF OF ONZE PRODUCTEN? BEL +31 174 280 371!