ASSORTIMENT

Pneumatische instrumentatie

Static pressure limit: 100bar

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

Static pressure limit: 75bar

The DP5-B works on the force balance principle and consists of two main units.

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

Static pressure limit: 75bar

The DP5-D works on the force balance principle and consists of two main units

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

Static pressure limit: 100bar
Differential pressure limit: 100bar

The DP5-H works on the force balance principle and consists of two main units

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c XDb

Static pressure limit: 100bar
Differential pressue limit: 100bar

The DP5-R works on the force balance principle and consists of two main units

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c XDb

PC13 converts DC input signal in a pneumatic output (3÷15, 2÷18, 2÷20, 4÷30 psi). ABS case IP20 for panel mounting.

The PC13 is a two wire, panel mounted, electropneumatic converter requiring a standard 4÷20 mA input and gives a 3÷15 psi (0,2÷1 bar), 2÷18 psi or 2÷20 psi output, and is for use with linear pneumatic actuators.

I/P converter for field mounting. It converts DC input signal in a pneumatic output (3÷15, 2÷18, 2÷20, 4÷30 psi).

The PC15 is a two wire, wall mounted, I to P converter requiring a standard 4÷20 mA input and gives a 3÷15 psi (0,2÷1 bar), 2÷18 psior 2÷20 psi output, and is for use with linear pneumatic actuators. An intrinsically safe version (Ex ia IIC T6, T5 - ATEX - 94/9/CE- : II 1 G), PC15.1 is also available

I/P converter suitable for high power actuators. It converts DC input signal in a pneumatic output up to 8 bar.

The PC18 is a two wire, wall mounted, electropneumatic converter requiring a standard 4÷20 mA input and gives a pneumatic adjustable signal 0,5 ...8 bar. An intrinsically safe version (Ex ia IIC T6, T5 - ATEX - 94/9/CE- : II 1 G), PC18.1 is also available.

Volume Booster Small Size 1/4"

Volume booster relay, YT-300 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.

* Supplies constant air pressure at the rate of 1:1.
* By-passing control enhances safety of control valve.
* Response to slight changes in input signal, which increases accuracy of output of air pressure to actuator.
* Built-in 100 mesh screen filters dusts in the air.

Volume Booster Small size (1/4" Stainless Steel 316)

Volume booster relay, YT-305 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.

* Supplies constant air pressure at the rate of 1:1.
* By-passing control enhances safety of control valve.
* Response to slight changes in input signal, which increases accuracy of output of air pressure to actuator.
* Built-in 100 mesh screen filters dustsin the air.

Volume Booster Large Size (3/4")

Volume booster relay, YT-310 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.

* Supplies constant air pressureat the rate of 1:1.
* By-passing control enhances safety of control valve.
* Response to slight changes in input signal, which increases accuracy of output of air pressure to actuator.
* Built-in 100 mesh screen filters dusts in the air.

Volume Booster Medium size 1/2" (Stainless Steel Type)

Volume booster relay, YT-315 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.

* Suppliesconstant air pressure at the rate of 1:1.
* By-passing control enhances safety of control valve.
* Response to slight changes in input signal, which increases accuracy of output of air pressure to actuator.
* Built-in 100 mesh screen filters dusts in the air.

Volume Booster Medium size 1/2"

Volume booster relay, YT-320 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.

* Supplies constant air pressureat the rate of 1:1.
* By-passing control enhances safety of control valve.
* Response to slight changes in input signal, which increases accuracy of output of air pressure to actuator.
* Built-in 100 mesh screen filters dusts in the air.

Volume Booster Medium size 1/2" (Stainless Steel Type)

Volume booster relay, YT-325 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.

* Suppliesconstant air pressure at the rate of 1:1.
* By-passing control enhances safety of control valve.
* Response to slight changes in input signal, which increases accuracy of output of air pressure to actuator.
* Built-in 100 mesh screen filters dusts in the air.

Lock Up Valve 1/4"

Lock Up Valve, YT-400 sense the main supply pressure and shuts down the air flow when the pressure is lower than setting.

* Compact size - NO bracket is required
* Detects small variation of the pressure - below 0.01MPa.

Lock Up Valve (Stainless Steel 316) 1/4"

Lock Up Valve, YT-405 sense the main supply pressure and shuts down the air flow when the pressure is lower than setting.

* Compact size - NO bracket is required
* Detects small variation of the pressure - below 0.01MPa.

Lock Up Valve 3/8"

Lock Up Valve, YT-430 sense the main supply pressure and shuts down the air flow when the pressure is lower than setting.

* Compact size - NO bracket is required
* Detects small variation of the pressure - below 0.01MPa.

Lock Up Valve (Stainless Steel 316) 3/8"

Lock Up Valve, YT-435 sense the main supply pressure and shuts down the air flow when the pressure is lower than setting.

* Compact size - NO bracket is required
* Detects small variation of the pressure - below 0.01MPa.

Snap Acting Relay 1/4"

YT-520 change the direction of air flow rate from one output port to the another when it senses low air pressure.

* Switches pressure flows when abnormal pressure detected
* Able to look actuator in its position
* Stemcan be extended and connected

Snap Acting Relay (Stainless Steel 316), 1/4"

YT-525 change the direction of air flow rate from one output port to the another when it senses low air pressure.

* Switches pressure flows when abnormal pressure detected
* Able to look actuatorin its position
* Stem can be extended and connected

Snap Acting Relay 3/8"

YT-530 change the direction of air flow rate from one output port to the another when it senses low air pressure.

* Switches pressure flows when abnormal pressure detected
* Able to look actuator in its position
* Stemcan be extended and connected

Snap Acting Relay (Stainless Steel 316) 3/8"

YT-535 change the direction of air flow rate from one output port to the another when it senses low air pressure.

* Switches pressure flows when abnormal pressure detected
* Able to look actuator in its position
* Stem can be extended and connected

Temperature and pressure lndicating Controller / Transmítter suitable for machines and process controls

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

High capacity lndicating Controller Transmitter for temperature, pressure and flow

Suitable for any industríal process. Four control forms available: ON-OFF, P, P+I and P+I+D. Scale width 100 mm.

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

Miniaturized air filter regulator.

The air filter regulator FR10 is specially designed for feed, with clean air and controlled pressure, all the measuring and control instrumentation, automatic machines and any type of pneumatic device.
The highprecision of control and its constructive characteristics make it particularly reliable even in environmental heavy conditions.

Features:
* Particulary compact design
* Easy to install
* Insensitive to mechanic vibrations
* Low maintenance
*Low consumption
* Fine regulation

3 ÷ 15 psi Pneumatic Controller with electríc inputs (PT100, mA, V Thermocouple).

Four control forms availabie: ON-OFF ,P, P+I and P+I+D. Scale width 100 mm.

8" circular chart recording controller for temperature, pressure and 3÷15 Psi input. Three control forms available: ON-OFF P and P+I.

The instruments are equipped with four standard legs for direct panel or wall mounting. On request a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal).

8" circular chart recording controller with electric input by thermocouple, PT100, V, mA. Three control forms available: ON-OFF, P and P+I.

The instruments are equipped with four standard legs for direct panel or wall mounting. On request a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal).

Air filter regulator.

The air filter regulator FR20 is specially designed for feed, with clean air and controlled pressure, all the measuring and control instrumentation, automatic machines and any type of pneumatic device.
The high precision ofcontrol and its constructive characteristics make it particularly reliable even in environmental heavy conditions and corrosive atmospheres.

Features:
* Copper free
* Easy to install
* Insensitive to mechanic vibrations
* Low maintenance
* Low consumption
* Fine regulation

10" circular chart recording controller for temperature, pressure and 3÷15 psi input. High air capacity, low consumptíon. Four control forms available: ON-OFF, P, P+I, and P+I+D.

The instruments are equipped with four standard legs for direct panel or wall mounting. On request a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal).

10" circular chart recording controller with electric inputs by thermocouple, PT100, V, mA. High air capacity, low consumption. Four control forms avaílable: ON-OFF, P, P+I, P+I+D.

The instruments are equipped with four standard legs for direct panel or wall mounting. On request a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal).

Strip chart recording controller for temperature, pressure and 3÷15psi input. High air capacity, low consumptíon. Four control forms available: ON-OFF, P, P+I, and P+I+D.

The instruments are equipped with four standard legs for direct panel or wall mounting. On request a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal).

Manual loading station is used for the remote positioning of air control valves and other pneumatic control equipment.

* Particulary compact design
* Easy to install
* Insensitive to mechanic vibrations
* Low maintenance
* Low consumption
*Fine regulation

Strip chart recording controller with electric inputs by thermocouple, PT100, V, mA. High air capacity, low consumption. Four control forms avaílable: ON-OFF, P, P+I, P+I+D.

The instruments are equipped with four standard legs for direct panel orwall mounting. On request a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal)

6" circular chart temperature recorder for pharmaceutic plants and refigerating rooms applications.

The Series 30 instruments are equipped with four standard legs for direct panel or wall mounting. On request, a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal).

5" circular chart temperature minirecorder for pharmaceutic plants and refigerating rooms applications.Contínuous trace writing up to 2 variablas.

The Series 40 instruments are equipped with four standard legs for direct panel or wall mounting.

The purgemeters series F.A. (air supply) and F.H. (water supply) find wide industrial application for the economic solution of level, flow and density measurement problems.

Materials:
* Plexiglas body resistent to normal atmospheres and to purgefluids.
* AISI 316 stainless steel float.
* O-Rings in NBR or Viton rubber with PVC plugs.
* AISI 316 stainless steel needle valve integrated and easily demountable.
* Differential pressure reducer in chromium brass or in AISI 316 stainless steel. It maintains flow value steady when counterpressure varies.

5" circular chart minirecorder with electríc inputs by thermocouple, PT100, V, mA. Contínuous trace writing up to 2 variablas.

The Series 40 instruments are equipped with four standard legs for direct panel or wall mounting.

6" circular chart recorder with electríc inputs by thermocouple, PT100, V, mA. Contínuous trace writing up to 2 variablas.

The Series 140 instruments are equipped with four standard legs for direct panel or wall mounting. On request, a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal).

8" circular chart recorder for temperature, pressure and 3÷1 5 psi input. Continuous trace writing up to 3 variables.

The instruments are equipped with four standard legs for direct panel or wall mounting. On request a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal)

The RR10 has been designed to reverse an input signal in a 1:1 ratio output signal, proportionally. Ex.: 3÷15 psi IN> 15÷3 psi OUT.

Low cost strip chart recorder for temperature, pressure and 3÷15 psi input. Continuous trace writing up to 2 variables.

The instruments are equipped with four standard legs for direct panel or wall mounting. On request a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal)

10" circular chart recorder for temperature, pressure and 3 ÷1 5 psi input. Continuous trace writing up to 3 variables.

The instruments are equipped with four standard legs for direct panel or wall mounting. On request a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal)

Strip chart recorder for temperature, pressure and 3÷15 psi input. Continuous trace writing up to 3 variables.

The instruments are equipped with four standard legs for direct panel or wall mounting. On request a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal)

The pressure selecting relay is engineered for the application on lock out controls and to operate on safety circuits.

The SR10 handle two 3÷15 psi signals and selact the higest one to send to the next device of the system, automatically.

8" circular chart recorder with electríc inputs by thermocouple, PT100, V, mA. Contínuous trace writing up to 2 variablas.

The instruments are equipped with four standard legs for direct panel or wall mounting. On request a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal)

The BR10 relay switch the lowest pneumatic signal wich automatically flows to the next unit of the system.

BR10 is also used as booster relay to reproduce a pneumatic signal with 1:1 ratio in a long distance piping.

10" circular chart recorder with electríc inputs by thermocouple, PT100, V, mA. Contínuous trace writing up to 3 variablas.

The instruments are equipped with four standard legs for direct panel or wall mounting. On request a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal)

Strip chart recorder with electric inputs by thermocouple, PT100, V, mA.

The instruments are equipped with four standard legs for direct panel or wall mounting. On request a mounting bracket is provided for mounting the unit on a 2" tubing (vertical or horizontal)

SPECIFIEKE INFORMATIE OVER ONS BEDRIJF OF ONZE PRODUCTEN? BEL +31 174 280 371!