ASSORTIMENT

Regelkleppen

Een regelklep is een klep die gebruikt wordt om vloeistofstroming te regelen door de grootte van de stromingsdoorgang te wijzigen, zoals aangegeven door een signaal van een regelaar. Dit maakt het mogelijk de directe controle van de stromingssnelheid en de consequent controle van proceshoeveelheden zoals druk, temperatuur en vloeistofniveau te regelen.

VL10 is the OMC entry level series with Body material in Ductil Iron GGG40.3 PN16 two ways single seat construction, soft tightness trim class VI (PTFE/Gr).

Actuators available:
* Pneumatic multisprings Diaphragm type - Pillars yoke (New actuators Series AL most powerful and versatiles);
* Piston (ON-OFF) type (Supply Air from 6 to 10 bar);
* Electric type (Different configuration available: Std, Spring return, Atex, Exd);
* From DN15 to DN100 - PN16

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

VD10 Serie is a two ways, single seat valve type with body material in Ductil Iron GGG40.3 PN16, designed to satisfy most of the medium/low pressure conditions to control fluids as steam, water, oil and other different general industrial medium.VD10 valves are designed to control a broad variety of fluids, like steam, water, most of the medium and gases. One of the main features of this serie is the top guided construction that assure a stable plug travel over entire stroke of the valve minimizing vibration and wear.

Actuators available:
* Pneumatic multisprings Diaphragm type - Pillars yoke (New actuators Series AL most powerful and versatiles);
* Piston (ON-OFF) type (Supply Air from 6 to 10 bar);
* Electric type (Different configuration available: Std, Spring return, Atex, Exd);
* From DN15 to DN200 - from PN16 to PN40

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

KD10 series is a top entry globe valve style body construction with a wide range of different single stage trims available. KD10 series combine the advanced modular design and the wide range of actuators to satisfy the needs of the industrial demand.

Available in Carbon Steel (WCC), Stainless Steel (CF8M) and materials on request (Duplex, Monel, Hastelloy, etc...) KD10 valves are designed to control a broad variety of fluids, like steam, water, most of the medium and gases. One of the main features of this serie is the top guided construction that assure a stable plug travel over entire stroke of the valve minimizing vibration and wear.

Actuators available:
* Pneumatic multisprings Diaphragm type - Integral yoke (New actuators Series AP most powerful and versatiles);
* Piston (ON-OFF) type (Supply Air from 6 to 10 bar);
* Electric type (Different configuration available: Std, Spring return, Atex, Exd);
* From DN15 to DN200 - from PN16 to PN40

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

KA10 series is a top entry globe valve style body construction with a wide range of different single stage trims available. KD10 series combine the advanced modular design and the wide range of actuators to satisfy the needs of the industrial demand.

Available in Carbon Steel (WCC), Stainless Steel (CF8M) and materials on request (Duplex, Monel, Hastelloy, etc...) KA10 valves are designed to control a broad variety of fluids, like steam, water, most of the medium and gases. One of the main features of this serie is the top guided construction that assure a stable plug travel over entire stroke of the valve minimizing vibration and wear.

Actuators available:
* Pneumatic multisprings Diaphragm type - Integral yoke (New actuators Series AP most powerful and versatiles)
* Piston (ON-OFF) type (Supply Air from 6 to 10 bar)
* Electric type (Different configuration available: Std, Spring return, Atex, Exd)
* From ½" to 8" ANSI 150/300

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

KA20 is a globe control valve designed to ensure perfect control of industrial fluid systems with operating pressures up to 105 bar.

Designed according to ANSI standard, KA20 is available in carbon steel (WCC), Stainless Steel (CF8M) and specialalloys materials on request (Duplex, Monel, Hastelloy, etc...) KA20 offers several configurations like: reduced bores, anti-noise and anti-cavitation trim, to meet all the control needs.

Actuators available:
* Pneumatic multisprings Diaphragm type - Integral yoke (New actuators Series AP most powerful and versatiles);
* Piston (ON-OFF) type (Supply Air from 6 to 10 bar);
* Electric type (Different configuration available: Std, Spring return, Atex, Exd);
* From ½" to 8" ANSI 600

Versionaccording to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

KA30 is a globe control valve designed to ensure perfect control of industrial fluid systems with operating pressures up to 260 bar.

Designed according to ANSI standard, KA30 is available in carbon steel (WCC), Stainless Steel (CF8M) and specialalloys materials on request (Duplex, Monel, Hastelloy, etc...) KA30 offers several configurations like: reduced bores, anti-noise and anti-cavitation trim, to meet all the control needs.

Actuators available:
* Pneumatic multisprings Diaphragm type - Integral yoke;
* Piston (ON-OFF) type (Supply Air from 6 to 10 bar);
* Electric type (Different configuration available: Std, Spring return, Atex, Exd);
* From 1" to 2" ANSI 900/1500

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

The OMC TD10 Series is a three-way style control valve for applications requiring diverting flow in a process control system.

The open flow paths and simple construction provide a reliable and easy–to-maintain valve solution. TD10 series could bemanufactured with pneumatic or electric actuators to meet all specific requirements of fluid control (water, steam, thermal oil, gas and other liquids) whether compatible with the material used.

Actuator can be:
* Pneumatic control or ON-OFF type
* Piston type (control signal 6-10 Bar);
* Electric type;

Boby: Ductile Iron, Carbon Steel, Alloy Carbon Steel, Austenitic Stainless Steel, Duplex, Superduplex ...
Size: from DN15 to DN200 - from PN 16 to PN 40

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

The OMC TM10 Series is a three-way style control valve for applications requiring mixing flow in a process control system.

The open flow paths and simple construction provide a reliable and easy–to-maintain valve solution. TM10 series could be manufactured with pneumatic or electric actuators to meet all specific requirements of fluid control (water, steam, thermal oil, gas and other liquids) whether compatible with the material used.

Actuator can be:
* Pneumatic control or ON-OFF type;* Piston type (control signal 6-10 Bar);
* Electric type;

Boby: Ductile Iron, Carbon Steel, Alloy Carbon Steel, Austenitic Stainless Steel, Duplex, Superduplex ...
Size: from DN15 to DN200 - from PN 16 to PN 40

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

Control valve for food processing, chemical and cosmetic industry.

The valve body is made in stainless steel and special care it taken to avoid dead spots. The clamp type cupling between the valve body and the intermediate body enables a quick dismounting, which is also ideal for cleaning in place (CIP method).

Actuators can be:
* Pneumatic control or ON-OFF type;
* Piston type (control signal 6-10 Bar);
* Electric type;

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

3 Way control mixing valve OMC is used to mixing two fluid and to send to one outlet.

This valve is used in the industrial sectors such the food, pharmaceutical, chemical and cosmetic, where the high hygienity is one of the essential characteristics. The regulation sistem is a shutter that can be linear or equipercentage.

Actuators can be:
* Pneumatic control or ON-OFF type;
* Piston type (control signal 6-10 Bar);
* Electric type;

Version according to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

3 Way divert valve OMC is used to deviate the passage fluid.

This valve is use in industrial sector such the food, pharmaceutical, chemical and cosmetic where the high hygienity is one of the essential characteristics. The regulation sistem is ashutter that can be linear or equipercentage. The seal system can be metallic or with soft insert to give perfect seal.

Actuators can be:
* Pneumatic control or ON-OFF type;
* Piston type (control signal 6-10 Bar);
* Electric type;

Versionaccording to Directive 2014/34/UE "ATEX" are available II 2 G IIC c X Gb / II 2 D IIIC c X Db

De beste regelkleppen die er te krijgen zijn

Bent u voor uw bedrijf op zoek naar een leverancier van regelkleppen? Als u een regelklep zoekt waarbij u er zeker van kunt zijn dat deze perfect werkt, dan raden wij u aan om eens een kijkje te komen nemen op onze website. Bij PandID vindt u namelijk de beste producten op het gebied van appendages en instrumentatie. Deze kunnen dan gebruikt worden bij leidingen, tanks en machinerie. We vertellen u hier graag meer over als u specifieke vragen heeft of advies nodig heeft. U kunt natuurlijk ook altijd een kijkje komen nemen op onze website, waar u zeer uitgebreide informatie over dit onderwerp terug kunt vinden.

 

Een regelklep kopen bij PandID

Wij maken het onze klanten zo eenvoudig mogelijk om de hoogst mogelijke kwaliteit te vinden. Als regelklep leverancier halen we onze producten van over de hele wereld. We verkopen niet alleen regelkleppen van over de hele wereld, we leveren ze ook over de hele wereld uit. We maken hierbij gebruik van ons eigen transport, zodat u er zeker van kunt zijn dat uw bestelling snel en betrouwbaar wordt afgeleverd. Dit alles tegen de scherpste prijzen die u hiervoor gaat vinden. Naast de perfecte regelklep verkopen we ook vele andere producten die geschikt zijn voor meet- en regelinstrumentatie.

 

Aan de slag met een regelklep leverancier

Als een van de grootste leveranciers op dit gebied ter wereld bieden we u graag de best mogelijke service. Hiervoor hebben wij altijd mensen paraat staan die graag voor u aan de slag gaan. Neem eens een kijkje op onze site als u meer wilt weten over onze producten, of over ons bedrijf. We helpen u graag verder in uw zoektocht naar de best mogelijke regelkleppen voor uw situatie. Meer weten? Dan kunt u natuurlijk ook altijd even contact met ons opnemen. We beantwoorden dan alle vragen die u maar kunt hebben over dit onderwerp.

SPECIFIEKE INFORMATIE OVER ONS BEDRIJF OF ONZE PRODUCTEN? BEL +31 174 280 371!