ASSORTIMENT

Scheepvaart

TWO VALVES FOR PRESSURE INSTRUMENT
BAR STOCK MANIFOLD
MOD. M212 Esec. - Exec 180°

* Forged body with outside screwed bonnet
* Process and Instruments threaded 1/2" NPT-F
* Process connection threaded 1/2" NPT-F
* Drain on request : threaded1/4" NPT-F with plug

Nominal operating pressure
* S.6000 Psi
* 420 Kg/cm2

Packing material PTFE as standard max temperature 180 °C.
For temperature until 500°C, in Graphoil

Material : AISI 316/316L
Other material on request

Three valves by-pass manifold for differential pressure instrument

Forged body with outside screwed bonnet
Process and Instruments connections flanged
Drain on request : threaded 1/4"NPT-F with plug

Nominal operating pressure :
S.6000 Psi420 Kg/cm2

Packing material PTFE as standard max temperature 180°C. For temperature until 500°C, supplied packing in Graphoil.

Material : AISI 316/316L

Three valves by-pass manifold for differential pressure instrument

Forged body with outside screwed bonnet
Instruments connections flanged
Process connection threaded 1/2" NPT-F
Drain on request : threaded 1/4"NPT-F with plug

Nominal operating pressure :
S.6000 Psi
420 Kg/cm2

Packing material PTFE as standard max temperature 180°C. For temperature until 500°C, supplied packing in Graphoil.

Material : AISI 316/316L

The Reefer recorder is an electro-mechanical recorder.

The technician can read the real time as well the historical temperature immediately from the chart, unlike the microprocessor data recorder, which should download the data into a handheld computer.

Automatic Temperature Recorder for Marine and Truck Refrigerating Container
Dry Cell Battery drives Quartz Motor. Avoids problems caused by forgetting to wind the spring and breakage due to over winding or corrosion
Environmentally friendly gas charged element - Mercury Free
Adopting harmless gas to move recorder pen, eliminates the worry of Mercury contamination of the cargo due to element leakage

Two valves manifold for vertical and horizontal mounting

Forged body with outside screwed bonnet
Connection threaded : 1/2" NPT-F ANSI B1.20.1

Nominal operating pressure :
S.3000 Psi
210 Kg/cm2

Packing material PTFE as standard max temperature 180°C. For temperature until 500°C, supplied packing in Graphoil.

Mercury Free Thermometer System
For PARTLOW Temperature Recorders, model TR20, SR10, TRLW, TRDW, DR.

* Filling: Xylol
* Sensor: type 3a, smooth, L=250 mm, d=12 mm, SS 1.4571, welded.
* Capillary: Cu - PVC covered, with SS tube
* Capillary protection: tube, SS 1.4301
* Length: 2500 mm
* Diameter: 6mm
* Bending radius:>20 mm
* Pressure: ca. 15 bar
* Range: -30°C / +30°C
* Calibration temperature: -20°C / 0°C / +20°C at 23°C ambient temp.
* Accuracy: ±1°C, 23°C amb. temp.

Pressure reducing valves made of gunmetal, with flange connections

Often flange pressure reducing valves with smaller connection sizes are required. For this reason, this type is now not only available in sizes DN65 and DN100, but also in sizes DN20 to DN50, as well as in a high- and low-pressure version. The body is made completely of corrosion-proof and seawater-resistant gunmetal. All wetted parts are made either of gunmetal or corrosion-resistant stainless steel.
All technical featuresof the stainless steel version have also been consistently incorporated into this version.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
756554 682mGFO-LP 20 FL / FL 20/20 PN40 (+ required sealing material)
756558 682mGFO-LP 25 FL / FL 25/25 PN40 (+ required sealing material)
756559 682mGFO-LP 32 FL / FL 32/32 PN40 (+ required sealing material)
756560 682mGFO-LP 40 FL / FL 40/40 PN40 (+ required sealing material)
756567 682mGFO-LP 50 FL / FL 50/50 PN40 (+ required sealing material)
756568 682mGFO-SP 20 FL / FL 20/20 PN40 (+ required sealing material)
756569 682mGFO-SP 25 FL / FL 25/25 PN40 (+ required sealing material)
756570 682mGFO-SP 32 FL / FL 32/32 PN40 (+ required sealing material)
756576 682mGFO-SP 40 FL / FL 40/40 PN40 (+ required sealing material)
756577 682mGFO-SP 50 FL / FL 50/50 PN40 (+ required sealing material)
756555 682mGFO-SP 65 FL /FL 65/65 PN16 (+ required sealing material)
756556 682mGFO-SP 65 FL /FL 65/65 PN40 (+ required sealing material)
756557 682mGFO-SP 80 FL /FL 80/80 PN40 (+ required sealing material)
756578 682mGFO-HP 20 FL / FL 20/20 PN40 (+ required sealing material)
756579 682mGFO-HP 25 FL / FL 25/25 PN40 (+ required sealing material)
756580 682mGFO-HP 32 FL / FL 32/32 PN40 (+ required sealing material)
756581 682mGFO-HP 40 FL / FL 40/40 PN40 (+ required sealing material)
756582 682mGFO-HP 50 FL / FL 50/50 PN40 (+ required sealing material)

Float level switches are used for point level detection of liquids in all type of vessels.

* Explosion proof version
* Wetted parts material 321SS
* Housing material: Aluminium or 321SS
* Housing protection IP66/68
* Nominal pressure 40bar
*Marine certificates (GL, DNV, LR, ABS, BV, PRS)

Pressure reducing made of stainless steel, with flange connections

In addition to the standard version made of stainless steel, both high- and low-pressure reducing valves are available. As well as this, stainless steel pressure gauges are available as an optional extra.
Also in the case of the flange pressure reducing valves, an extremely service-friendly replacement internal cartridge with integrated dirt-trap is available.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
756583 482mGFO-LP 20 FL / FL 20/20 PN40 (+ required sealing material)
756584 482mGFO-LP 25 FL / FL 25/25 PN40 (+ required sealing material)
756585 482mGFO-LP 32 FL / FL 32/32 PN40 (+ required sealing material)
756586 482mGFO-LP 40 FL /FL 40/40 PN40 (+ required sealing material)
756587 482mGFO-LP 50 FL / FL 50/50 PN40 (+ required sealing material)
756588 482mGFO-SP 20 FL / FL 20/20 PN40 (+ required sealing material)
756599 482mGFO-SP 25 FL / FL 25/25 PN40 (+ required sealingmaterial)
756600 482mGFO-SP 32 FL / FL 32/32 PN40 (+ required sealing material)
756612 482mGFO-SP 40 FL / FL 40/40 PN40 (+ required sealing material)
756613 482mGFO-SP 50 FL / FL 50/50 PN40 (+ required sealing material)
756551 482mGFO-SP 65 FL/FL 65/65 PN16 (+ required sealing material)
756552 482mGFO-SP 65 FL /FL 65/65 PN40 (+ required sealing material)
756553 482mGFO-SP 80 FL /FL 80/80 PN40 (+ required sealing material)
756614 482mGFO-HP 20 FL / FL 20/20 PN40 (+ required sealing material)
756623 482mGFO-HP 25 FL / FL 25/25 PN40 (+ required sealing material)
756624 482mGFO-HP 32 FL / FL 32/32 PN40 (+ required sealing material)
756633 482mGFO-HP 40 FL / FL 40/40 PN40 (+ required sealing material)
756634 482mGFO-HP 50 FL /FL 50/50 PN40 (+ required sealing material)

Pressure reducing valves made of gunmetal, with threaded connections

A particularly robust pressure reducing valve in all-metal design, which has proven itself not only in drinking water applications but also in harsh operating conditions in industrial applications or in cases of fluctuating environmental temperatures. This pressure reducing valve is also suitable for hot water applications. Stability and reliability: The set outlet pressure at zero-usage is held constant even in the case ofgreatly varying inlet pressures.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
756643 681mGFO-LP 15 BSPT-m / BSPT-m 15/15 PN40 (+ required sealing material)
756644 681mGFO-LP 20 BSPT-m / BSPT-m 20/20 PN40 (+ required sealing material)
756653 681mGFO-LP 25 BSPT-m / BSPT-m 25/25 PN40 (+ required sealing material)
756654 681mGFO-LP 32 BSPT-m / BSPT-m 32/32 PN40 (+ required sealing material)
756663 681mGFO-LP 40 BSPT-m / BSPT-m 40/40 PN40 (+ required sealing material)756664 681mGFO-LP 50 BSPT-m / BSPT-m 50/50 PN40 (+ required sealing material)
756561 681mGFO-SP 15 BSPT-m / BSPT-m 15/15 PN40 (+ required sealing material)
756562 681mGFO-SP 20 BSPT-m / BSPT-m 20/20 PN40 (+ required sealing material)
756563 681mGFO-SP 25 BSPT-m / BSPT-m 25/25 PN40 (+ required sealing material)
756564 681mGFO-SP 32 BSPT-m / BSPT-m 32/32 PN40 (+ required sealing material)
756565 681mGFO-SP 40 BSPT-m / BSPT-m 40/40 PN40 (+ required sealing material)
756566 681mGFO-SP 50 BSPT-m / BSPT-m 50/50 PN40 (+ required sealing material)
756697 681mGFO-HP 15 BSPT-m / BSPT-m 15/15 PN40 (+ required sealing material)
756698 681mGFO-HP 20 BSPT-m / BSPT-m 20/20 PN40 (+ required sealing material)
756699 681mGFO-HP 25 BSPT-m / BSPT-m25/25 PN40 (+ required sealing material)
756916 681mGFO-HP 32 BSPT-m / BSPT-m 32/32 PN40 (+ required sealing material)
756917 681mGFO-HP 40 BSPT-m / BSPT-m 40/40 PN40 (+ required sealing material)
756918 681mGFO-HP 50 BSPT-m / BSPT-m 50/50 PN40 (+

Square Flange (with mounting accessories)

Aluminium or Steel

Type; CSQFL 586B

Total equipment isolation valves cannot gaurantee 100% leakage free.

Leakage trouble may cause big loses of industrial equipment such as contamination of fluid mixing, personal accident by inhalation of toxic gases or unexpected explotion that leads to occasionally huge disatser.

Typical blank work have been had actual problems at site as follows:

* Environment pollution during blinding work
* Exposure to hazard of toxic fluid to worker
* Potential hazard of sparking
* Need tools, gasket, cranes etc
* In need of Specialist or trained worker
* High labor cost
* Long total shutoff time

VISCO and VISCOROL magnetic level indicators comply with the following European Directives: PED 97/23/EC - up to Class IV (plastic materials excluded) and ATEX 94/9/EC (for electrical equipment only).

VISCO and VISCOROL magnetic level indicatorshave been designed for optical viewing of liquid levels in most industrial applications. They are also suitable for high pressure and high temperature applications and the range is complemented by having a pharmaceutical grade option available when requested.

The indicators can be equipped with electrical contacts or with a potentiometer transmitter for full automation of process management, including pressurised tanks, vats, boilers, for the control of pumps, valves and alarm systems.

The SGE-25 hydrostatic level probe is applicable to measure liquid levels in tanks, deep wells or piezometers.

* Any measurement range
* From 1 up to 500 m H2O Integrated internal overvoltage protection circuit
* Marine certificate DNV ATEX Intrinsic safety

The PCE-28 pressure transmitter is applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and liquids.

Any range from 0...25 mbar up to 0...1000 bar
4 ÷ 20 mA two-wire or 0 ÷ 10 V output
Intrinsic safety certificate (ATEX, IECEx)
Low-voltage version with ATEX and IECEx certificate (model PC-29A, PC-29B) NEW
Marine certificate - DNV, BV
Communication protocol Modbus RTU ü Gold plated diaphragm
SIL 1 certificate Version with local display

Pressure reducing valves made of stainless steel, with threaded connections

New applications can now be covered by Goetze's well-proven, robust pressure reducing valve with threaded connections now that they have extended their gunmetal series 681 to include a stainless steel version. The new 481 offers all the advantages of the 681 – while at the same time withstanding very critical and aggressive media and environments. Additional outlet pressure ranges of 0,5 to 2 bar and 5 to 15 bar makethis valve suitable for an even wider range of applications.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
756919 481mGFO-LP 15 BSPT-m / BSPT-m 15/15 PN40 (+ required sealing material)
756920 481mGFO-LP 20 BSPT-m / BSPT-m20/20 PN40 (+ required sealing material)
756927 481mGFO-LP 25 BSPT-m / BSPT-m 25/25 PN40 (+ required sealing material)
756928 481mGFO-LP 32 BSPT-m / BSPT-m 32/32 PN40 (+ required sealing material)
756929 481mGFO-LP 40 BSPT-m / BSPT-m 40/40 PN40 (+ required sealing material)
756930 481mGFO-LP 50 BSPT-m / BSPT-m 50/50 PN40 (+ required sealing material)
756937 481mGFO-SP 15 BSPT-m / BSPT-m 15/15 PN40 (+ required sealing material)
756938 481mGFO-SP 20 BSPT-m / BSPT-m 20/20 PN40 (+ required sealing material)
756939 481mGFO-SP 25 BSPT-m / BSPT-m 25/25 PN40 (+ required sealing material)
756940 481mGFO-SP 32 BSPT-m / BSPT-m 32/32 PN40 (+ required sealing material)
756949 481mGFO-SP 40 BSPT-m / BSPT-m 40/40 PN40 (+ required sealing material)
756950 481mGFO-SP 50 BSPT-m / BSPT-m 50/50 PN40 (+ required sealing material)
756959 481mGFO-HP 15 BSPT-m / BSPT-m 15/15 PN40 (+ required sealing material)
756960 481mGFO-HP 20 BSPT-m / BSPT-m 20/20 PN40 (+ required sealing material)
756968 481mGFO-HP 25 BSPT-m / BSPT-m 25/25 PN40 (+ required sealing material)
756969 481mGFO-HP 32 BSPT-m / BSPT-m 32/32 PN40 (+ required sealing material)
756970 481mGFO-HP 40 BSPT-m / BSPT-m 40/40 PN40 (+ required sealing material)
756978 481mGFO-HP 50 B

Pressure reducing valves made of stainless steel, with threaded connections

This pressure reducing valve is an alternative to the larger versions, in cases where only small flow volumes are required or the medium in question is compressed air. With an outlet pressure of max. 50 bar the pressure reducing valve is used, for example, to control the starter air on ships. It goes without saying, that it holds all the necessary marine approvals of the various bodies such as Germanischer Lloyd etc.This valve is used in many industrial applications particularly for compressed air and neutral gases.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
756571 683mGO-SP 10 F/F 10/10 NBR
756572 683mGO-SP 15 F/F 10/10 NBR
756573 683mGO-SP 10 F/F 10/10 NBR
756574 683mGO-SP 20 F/F 20/20 NBR
756575 683mGO-SP 32 F/F 32/32 NBR

Equipment for Float Level Switches

Testing equipment is designed for mechanical testing of electric casings / housings, without disassembling switch off the tank.

Overflow and pressure control valves made of gunmetal, angle-type, with threaded connections

Robust, proportional overflow valve - gastight version. Allround overflow valve for pump protection and bypass control applications, due to its compact design, possibility of user-adjustment within the soring ranges as well as various sealing materials.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
756981 618sGFO 10 F/F 10/10 NBR (+ set pressure / pressure range)
756982 618sGFO 15 F/F 15/15 NBR (+ set pressure / pressure range)
756983 618sGFO 20 F/F 20/20 NBR (+ set pressure / pressure range)
756984 618sGFO 25 F/F 25/25 NBR (+ set pressure / pressure range)
756985 618sGFO 32 F/F 32/32 NBR (+ set pressure / pressure range)
756986 618sGFO 40 F/F 40/40 NBR (+ set pressure / pressure range)
756987 618sGFO 50 F/F 50/50 NBR (+ set pressure / pressure range)
756991 618sGFO 10 F/F 10/10 PTFE (+ set pressure / pressure range)
756992 618sGFO 15 F/F 15/15PTFE (+ set pressure / pressure range)
756993 618sGFO 20 F/F 20/20 PTFE (+ set pressure / pressure range)
756994 618sGFO 25 F/F 25/25 PTFE (+ set pressure / pressure range)
756995 618sGFO 32 F/F 32/32 PTFE (+ set pressure / pressure range)
756996 618sGFO 40 F/F 40/40 PTFE (+ set pressure / pressure range)
756997 618sGFO 50 F/F 50/50 PTFE (+ set pressure / pressure range)
756971 618tGFO 10 F/F 10/10 NBR (+ set pressure / pressure range)
756972 618tGFO 15 F/F 15/15 NBR (+set pressure / pressure range)
756973 618tGFO 20 F/F 20/20 NBR (+ set pressure / pressure range)
756974 618tGFO 25 F/F 25/25 NBR (+ set pressure / pressure range)
756975 618tGFO 32 F/F 32/32 NBR (+ set pressure / pressure range)
756976 618tGFO 40 F/F 40/40 NBR (+ set pressure / pressure range)
756977 618tGFO 50 F/F 50/50 NBR (+ set pressure / pressure range)
756961 618tGFO 10 F/F 10/10 PTFE (+ set pressure / pressure range)
756962 618tGFO 15 F/F 15/15 PTFE (+ set pressure

Type TOR S with chamber protection, several float type materials and with NFO cable execute with SPDT changeover Reed Switch.

The TOR S magnetic level switch is recommended for application in ship bilges, to control wastewater, sea water and water containing oil residue.

It can also be used in tanks that are difficult to access and where the presence of liquids must be reported.

Equipped with reed switch contacts, it allows the control of one operation point.

Several level switchesinstalled locally in the ballast tanks and are used to remotely report the achievement of various filling levels.

In addition, when suitably connected to each other, several instruments carry out the start and stopping action of the pumps.

Boxy developed innovative BOXY BLIND VALVE to replace existing blank, spectacle plate, DBB(Double Block and Bleed) valve and spool piece without pipe revision for the first in the world.

* No need pipeline revision to replace existing isolation method (Typical valve (+Blank),Spool piece etc.)
* Positive shutoff with quick change
* No ground pollution
* Safe working
* No need tools, gaskets, cranes etc
* Untrained one person with handwheel operation
* Minimum maintenance
* No line spreading

The PRE-28 transmitter is applicable to the measurement of differential pressure of gases, vapours and liquids.

Overloads up to 420 bar total static pressure
Accuracy 0,25%
Any range from 0...16 mbar up to 0...25 bar
Intrinsic safety certificate (ATEX, IECEx)
Marine certificate - DNV, BV

The L Series side entry level switch provides a reliable accurate and low cost solution to tank level control.

The switch is available in all thermoplastic construction or in a combination of 316 Stainless Steel and Polypropylene. The level switch can be supplied with a 500 Volt rated single pole double throw microswitch for general control circuit use or with a S.P.D.T reed switch for low voltage low current applications. The L Series level switch is built tough to give a long reliable service life in the most arduous applications.

Features:
* Stainless steel or thermoplastic
* Built in manual override
* 15 Amp 500 volt S.P.D.T switch
* Unique seal-less coupling
* Weatherproof IP67 housing
* Simple to install
* Fully serviceable

Valve fluid level indicator, heavy duty series

* For glasses with diameter of 13, 16, 20 and 25 mm
* Material: brass, stainless steel 1.4571
* Temperature: 200° C
* Pressure range: PN 10 - 25 according to design
* Length of glas tube: centerdistance minus 30 mm

Overflow and pressure control valves made of gunmetal, angle-type, with threaded connections - external adjustment -

By means of an external setting mechanism this valve can be set or adjusted by the operator during operation. The closed, gastight version with large spring ranges offers a wide range of application possibilities. This valve is also widely used as an overflow valve in applications where the plant pressure often changes. Due to its versatility and large spring ranges, this valve can be highly recommended as a stock item.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757161 617tGFO 10 F/F 10/10 (+ required sealing material and set pressure / pressure range)
757162 617tGFO 15 F/F 15/15 (+ required sealing material and set pressure / pressure range)
757163 617tGFO 20 F/F 20/20 (+ required sealing material and set pressure / pressure range)
757164 617tGFO 25 F/F 25/25 (+ required sealing material and set pressure / pressure range)
757165 617tGFO 32 F/F 32/32 (+ required sealing material and set pressure / pressure range)
757166 617tGFO 40 F/F 40/40 (+ required sealing material and set pressure / pressure range)
757167 617tGFO 50 F/F 50/50 (+ required sealing material and set pressure / pressure range)

The SGE-25S and SGE-25C probes are applicable to measure levels of liquids containing contaminants or suspensions.

* Any measurement range
* From 2 up to 20 m H2O Integrated internal overvoltage protection circuit
* ATEX Intrinsic safety
* Marine certificate DNV

Overflow / pressure control valves made of stainless steel, angle-type with threaded connections - externally adjustable -

If the 617 series made of gunmetal and brass cannot be used due to an aggressive medium or an aggressive environment, the new 417 series made of highly corrosion resistant stainless steel provides a solution. The sealed and gas-tight design covers an even wider application range. The valves can be conveniently adjusted or aligned using the external adjustment, which means that perfect alignment to the operating conditions of the system is possible. They can, however, also be set and sealed at the factory.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757168 417tGFO 10 F/F 10/10 (+ requiredsealing material and set pressure / pressure range)
757169 417tGFO 15 F/F 15/15 (+ required sealing material and set pressure / pressure range)
757170 417tGFO 20 F/F 20/20 (+ required sealing material and set pressure / pressure range)
757171 417tGFO 25 F/F 25/25 (+ required sealing material and set pressure / pressure range)
757172 417tGFO 32 F/F 32/32 (+ required sealing material and set pressure / pressure range)
757173 417tGFO 40 F/F 40/40 (+ required sealing material and set pressure / pressure range)
757174 417tGFO 50 F/F 50/50 (+ required sealing material and set pressure / pressure range)

Overflow / pressure control valves made of gunmetal, angle-type with threaded connections - externally adjustable by hand wheel -

The alternative to the stainless steel version made of corrosion resistant gunmetal. Apart from the medium resistance of the housing material, the design is identical to the stainless steel series 453.
A suitable sealing material can be chosen for almost every medium. The valves can be set to the required pressure and sealed in the factory, or can be convenientlyadjusted by the customer in the corresponding spring range using the hand wheel. The setting or adjustment can also be made during operation.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757175 853bGFO 15 M/F 15/25 (+ required sealing material and set pressure / pressure range)
757176 853BGFO 20 M/F 20/32 (+ required sealing material and set pressure / pressure range)
757177 853BGFO 25 M/F 25/40 (+ required sealing material and set pressure / pressure range)
757178 853BGFO 32 M/F 32/50 (+ required sealing material and set pressure / pressure range)
757179 853BGFO 32 M/F 40/50 (+ required sealing material and set pressure / pressure range)
757180 853BGFO 32 M/F 50/50 (+ required sealing material andset pressure / pressure range)

Overflow / pressure control valves made of stainless steel, angle-type with threaded connections - externally adjustable by hand wheel -

These overflow or control valves have been developed for complex applications with, for example, large overflow volumes, viscose media and counter pressures etc. With the stainless steel bellows that compensate counter pressures, a counter pressure affecting the outlet side does not influence the setting of the valve. The springs, designed precisely for thesetting ranges, with the complex technical design of function parts in the flow range and the housing lead to the unusually high flow volumes for overflow valves despite the very proportional control reactions.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757181 453bGFO 15 M/F 15/25 (+ required sealing material and set pressure / pressure range)
757182 453BGFO 20 M/F 20/32 (+ required sealing material and set pressure / pressure range)
757183 453BGFO 25 M/F 25/40(+ required sealing material and set pressure / pressure range)
757184 453BGFO 32 M/F 32/50 (+ required sealing material and set pressure / pressure range)
757185 453BGFO 32 M/F 40/50 (+ required sealing material and set pressure / pressure range)
757186 453BGFO 32 M/F 50/50 (+ required sealing material and set pressure / pressure range)

DBX type of Blind valve has good advantages in Oil terminal & offshore applications where is limited installation space and marine pollution is strictly prohibited.

The full enclosed body & compact design prevents ground pollution and it allows to install at parallel pipe lines.

Overflow and pressure control valves made of gunmetal, straightway form, with threaded ­connections

The alternative to stainless steel made of corrosion-resistant gunmetal. The advantages of an external adjustment possbility during operation, high flow rates at low differential pressures, suitability for liquid and gaseous media. Easy service due to the replacement valve cartridge make this diaphragm-controlled overflow valve suitable for a wide range of applications.

Examples of use &Approvals see datasheet

IMPA Part No. Item Code
757187 630mGFO 15 BSPT-m / BSPT-m 15/15 (+ required sealing material and set pressure / pressure range)
757188 630mGFO 20 BSPT-m / BSPT-m 20/20 (+ required sealing material and set pressure / pressure range)
757189 630mGFO 25 BSPT-m / BSPT-m 25/25 (+ required sealing material and set pressure / pressure range)
757190 630mGFO 32 BSPT-m / BSPT-m 32/32 (+ required sealing material and set pressure / pressure range)
757191 630mGFO 40 BSPT-m /BSPT-m 40/40 (+ required sealing material and set pressure / pressure range)
757192 630mGFO 50 BSPT-m / BSPT-m 50/50 (+ required sealing material and set pressure / pressure range)

The SGE-25S and SGE-25C probes are applicable to measure levels of liquids containing contaminants or suspensions.

* Any measurement range
* From 2 up to 20 m H2O Integrated internal overvoltage protection circuit
* ATEX Intrinsic safety
* Marine certificate DNV

Overflow and pressure control valves made of stainless steel, straightway form, with threaded connections

This diaphragm-controlled overflow valve allows high flow rates at low differential pressure. In its closed, gastight version it is suitablefor liquid and gaseous media. Fitted with Viton seals, its range of applications is extended so that it is suitable for media such as oil, petrol, kerosine or oil-laden compressed air. Extremely service-friendly due to replacement valve cartridge. The set pressure can easily be read-off the (optional) pressure gauge.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757193 430mGFO 15 BSPT-m / BSPT-m 15/15 (+ required sealing material and set pressure / pressure range)
757194 430mGFO 20 BSPT-m / BSPT-m 20/20 (+ required sealing material and set pressure / pressure range)
757195 430mGFO 25 BSPT-m / BSPT-m 25/25 (+ required sealing material and set pressure / pressure range)
757196 430mGFO 32 BSPT-m / BSPT-m 32/32 (+ required sealing material and set pressure / pressure range)
757197 430mGFO 40 BSPT-m / BSPT-m 40/40 (+ required sealing material and set pressure / pressure range)
757198 430mGFO 50 BSPT-m / BSPT-m 50/50 (+ required sealing material and set pressure / pressure range)

Smart pressure transmitters are applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and liquids.

4...20 mA, 0...20 mA or 0...5 mA output signal + HART protocol
Digital PROFIBUS PA signal
Displaywith backlight Programmable range, zero shift, characteristic and damping ratio with local panel keys
SIL 2 certificate ü Intrinsic safety certificate (ATEX, IECEx)
Explosion proof certificate (ATEX, IECEx)
Marine certificate - DNV, BV
PED Conformity (97/23/EC)
Accuracy 0,075% (0,05% on request)
Gold plated diaphragm (Au) MID (Measuring Instruments Directive) - certificate acc. to 2004/22/WE directive and OIML R140:2007 recommendations.

Overflow and pressure control valves made of stainless steel, angle-type, with threaded connection - external adjustment -

Highly corrosion-resistant overflow valve - closed, gastight version. This is suitable for all media and due to its large spring range is suitable for a wide range of applications. Therefore it is also ideally suitable, when a customer wants to stock a valve suitable for a wide range of applications and varying set pressures. This valve is particularly maintenance-friendly due to an easily replaced valve cartridge. The valve can also be easily set or adjusted during operation.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
756979 418tGFO 10 F/F 10/10 (+ required sealing material)
756980418tGFO 15 F/F 15/15 (+ required sealing material)
756988 418tGFO 20 F/F 20/20 (+ required sealing material)
756989 418tGFO 25 F/F 25/25 (+ required sealing material)
756990 418tGFO 32 F/F 32/32 (+ required sealing material)

The APR-2000ALW transmitter is applicable to the measurement of differential pressure of gases, vapours and liquids.

4...20 mA, 0...20 mA or 0...5 mA output signal + HART protocol
Digital PROFIBUS PA signal
Display with backlight
SIL 2 certificate
Intrinsic safety certificate (ATEX, IECEx)
Explosion proof certificate (ATEX, IECEx)
PED Conformity (97/23/EC) Programmable zero range, shift, characteristic and damping ratio with ü local panel keys
Static pressure limit up to 420bar
Accuracy 0,075% (0,05% on request)
Marine certificate - DNV, BV
Gold plated diaphragms Wetted parts material Hastelloy C276

TOR Series Magnetic Vertical Level Switches made entirely of stainless steel, with weatherproof housing, thread & flange connections and with the requirements of the European Directive ATEX 94/9/EC, PED 97/23/EC.

Magnetic activated vertical levelswitches in many executions for controlling liquid levels in most industrial applications.

Instruments with rigid rod for vertical installation.

Used for full automation of control management, including pressurised tanks, tubs, boilers and forthe control of pumps, valves and alarm systems.

SBX type Blind valve has good advantages in gaseous fluid or critical pipeline with acid, flamable, toxic or carcinogenic media.

The full enclosed body & compact design prevents environmental pollution and it allows to install at parallel pipe lines.

Valve fluid level indicator, light duty series

* For glasses with diameter of 13, 16, 20 and 25 mm
* Material: brass
* Temperature: 200° C
* Pressure range: PN 10 - 25 according to design
* Length of glas tube: center distance minus 30 mm

Overflow and pressure control valves made of gunmetal, straightway form, with flange ­connections

In cases where flange connections are required, this valve offers the same features as the 630 version. The robust all-metal design makes this valveideal for harsh operating- and environmental conditions, when sensitive control is required.
The set pressure can easily be read-off the (optional) pressure gauge.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757209 631mGFO 20 FL / FL 20/20 PN40 (+ required sealing material)
757210 631mGFO 25 FL / FL 25/25 PN40 (+ required sealing material)
757218 631mGFO 32 FL / FL 32/32 PN40 (+ required sealing material)
757219 631mGFO 40 FL / FL 40/40 PN40 (+ required sealing material)
757220 631 mGFO 50 FL / FL 50/50 PN40 (+ required sealing material)
757227 631mGFO 65 FL /FL 65/65 PN16 (+ required sealing material)
757228 631mGFO 65 FL /FL 65/65 PN40 (+ required sealing material)
757229 631mGFO 80 FL /FL 80/80 PN40 (+ required sealing material)

Overflow and pressure control valves made of stainless steel, straightway form with flange ­connections

High flow rates at low differential pressures. Can be adjusted and set externally during operation, for liquid and gaseous media, service friendly due to replacement cartridge. This overflow valve made of high-alloyed stainless steel combines all of these advantages. According to the sealing- and diaphragm materials employed, these valves can be used for neutral and non-neutral media.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757230 431mGFO 20 FL / FL 20/20 PN40 (+ required sealing material)
757237 431mGFO 25 FL / FL 25/25 PN40 (+ required sealing material)
757238 431mGFO 32 FL / FL 32/32 PN40 (+ required sealing material)
757239 431mGFO 40 FL / FL 40/40 PN40 (+ required sealing material)
757240 431 mGFO 50 FL / FL 50/50 PN40 (+ required sealing material)
757253 431mGFO 65 FL /FL 65/65 PN16 (+ required sealing material)
757254 431mGFO 65 FL/FL 65/65 PN40 (+ required sealing material)
757255 431mGFO 80 FL /FL 80/80 PN40 (+ required sealing material)

Safety valves made of GGG 40.3 spheroidal graphite cast iron, with flange connections

These safety valves with flange connections and made of spheroidal graphite cast iron, are an economcial alternative for applications where corrosion-resistanceis not required. A large number of versions for a wide range of applications, such as metal to metal sealing or metal supported elastomere seals, are available as optional extras.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
756255 352sFO DN40 x DN65 PN40
756256 352sFO DN50 x DN80 PN40
756257 352sFL DN40 x DN65 PN40
756258 352sFL DN50 x DN80 PN40
756271 352tGFO DN40 x DN65 PN40
756272 352tGFO DN50 x DN80 PN40
756273 352tGFL DN40 x DN65 PN40
756274 352tGFL DN50x DN80 PN40
756275 352bGFO DN40 x DN65 PN40
756276 352bGFO DN50 x DN80 PN40
756277 352bGFL DN40 x DN65 PN40
756278 352bGFL DN50 x DN80 PN40

The SGE-25.Smart level probe is applicable to measure liquid levels in tanks, deep wells or piezometers.

* Programmable zero shift, range and damping ratio
* 4...20 mA output signal + HART protocol
* Accuracy 0.1%
* Integrated internal overvoltage
* protection circuit
* ATEX Intrinsic safety Special version with Titanium wetted parts (SGE-25S.Smart)
* Marine certificate DNV

SDX Type special blind valve has developed for the requirement of isolation under pressure.

Open/close position can be changed with soft seals (special sealing kids) achieve positive isolation of liquid / gas fluids without depressurize the pipeline.

Dual gear-set actuator allows no friction during operation and soft seal can make perfect isolation.

Safety valves made of gunmetal, angle-type with flange connections

This safety valve range is also completely made of corrosion-resistant materials. The body is made of gunmetal and the stainless steel spring and internal parts, which are made ofstainless steel, are hard to beat in terms of corrosion-resistance, especially when confronted with agressive watery solutions, salt water or a saline atmosphere.
The best possible version is available for virtually every application imaginable, whether this requires metal to metal sealing to meet highest tightness requirements or a metal supported o-ring seal made of a variety of materials or even back-pressure ­compensating gastight metal bellows or a gastight spring housing.

Examples ofuse & Approvals see datasheet

IMPA Part No. Item Code
756279 852bHL DN40 x DN65 PN40
756280 852bHL DN50 x DN80 PN40
756281 852tGFO DN40 x DN65 PN40
756282 852tGFO DN50 x DN80 PN40
756283 852tGFL DN40 x DN65 PN40
756284 852tGFL DN50 x DN80 PN40
756285 852bGFO DN40 x DN65 PN40
756286 852bGFO DN50 x DN80 PN40
756287 852bGFL DN40 x DN65 PN40
756288 852bGFL DN50 x DN80 PN40

Safety valves made of stainless steel, angle-type with flange connections

This multi-talent which is made completely of high-alloy stainless steel fulfills even the highest demands when it comes to the protection of pressurized systems. The rangeof designs for various media includes a wide range of sealing options, which even includes metal to metal sealing. These valves can be used under high temperatures and are thus also suitable for the protection of large steam boilers and solar plants.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
756289 452tGFO DN40 x DN65 PN40
756290 452tGFO DN50 x DN80 PN40
756291 452tGFL DN40 x DN65 PN40
756292 452tGFL DN50 x DN80 PN40
756293 452bGFO DN40 x DN65 PN40
756294 452bGFO DN50 x DN80 PN40
756295 452bGFL DN40 x DN65 PN40
756296 452bGFL DN50 x DN80 PN40

Safety valves with diaphragm made of gunmetal, angle type with threaded connections

651mWIK with inlet and outlet diameter equal.
Particularly in the case of valves which are employed in potable water installations, we do not accept any compromises regarding the materials used. Only the highest quality materials suitable and approved for potable water applications are used in these valves. These types of safety valves with diaphragm are installed in the cold water pipe before the hot waterheater to protect it from inadmissible overpressure.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757071 651mWIK 1/2"
757072 651mWIK 3/4"
757073 651mWIK 1"
757074 651mWIK 1-1/4"
757075 651mWIK 1-1/2"
757076 651mWIK 2"

Hydrostatic level probes are applicable to measure levels of liquids in open tanks, channels, measuring constrictions of open channels, streams.

* Any measuring range from 0...200 to 0...3000 mm H2O ATEX Intrinsic safety (version PCE-28P only)
*Smart version - with Hart protocol (version APC-2000ALW/P only)
* Marine certificate - DNV, BV (version PCE-28P only)

Safety valves with diaphragm made of gunmetal, all-metal construction angle type with threaded connections

651mHIK with inlet and outlet diameter equal
Robust safety valve with diaphragm with an all-metal construction. Designed to protect hot-water- and heating-systems.
This unmatched design, which does not have any plastic parts, means that these valves are also suitable for very high external temperatures.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757081 651mHIK 1/2"
757082 651mHIK 3/4"
757083 651mHIK 1"
757084 651mHIK 1-1/4"
757085 651mHIK 1-1/2"

EX Type blind valve offers 100% isolation for severe service with extrem temperature and pressure /or cryogenic (-196?) application.

Sample picture shows an application at 1500F(816?) 2500 LBS, DN 500

No internal gasket with simple structure minimize contact surface with extream media and unique spreading mechanism make a gap to switch blind plate position in a short time.

Strong torque for tighteness with solid structure enable to isolate severe pipeline with safe.

Only gasket replacement of blind plate is needed for maintenance.

Valve fluid level indicator BULL

* Material: Brass (Working pressure 150 PSI)
* Material: Body Bronze (Working pressure 150 PSI)
* Connection: 1/2" & 3/4" BSP Male Threaded
* Connection: 1/2" BSP Male Threaded
* Sight Tube: 1/2" dia. (Acrylic of Glass)

Bracket Sump Sensor LCG-1036

Technical Data:
* Mounting Style: Brackt Mounting
* Slosh Shield Material: Acrylic 60x4(t)
* Float & Stem Material: SUS 316 & SUS 304
* Maximum Temperature: -20°C-80°C
* Maximum Pressure: 20 bar
* Float S.G.: 0.7
* Minimum Fluid S.G.:0.8

Electrical Data:
* Contact Form: N/O (N/C)
* Switching Power Max. VA: 50W(70VA)
* Switching Voltage AC Max. V: 240
* Switching Voltage DC Max. V: 200
* Switching Current Max. A: 0.5
* Electrical Termination: VDE H05SS FEP-Jacket Cable 1M

Safety valves made of gunmetal, angle-type with threaded connections

A proven series with an extremely compact design: with its very good price/performance ratio this valve has been proving its reliability for many years. In addition to the flexible basic version, according to the version and sealing material in question, this valve can be used for a varied range of applications, media and temperatures. As an optional extra, these valves can be fitted with metal bellows and/or a gastight cap. Consequently, these valves can be configured for applications involving non-neutral, inflammable, toxic and viscous media.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757070 851sGK 0.5-25 BAR 1/2" x 1/2"
757077 851sGK0.5-25 BAR 1/2" x 1"
757078 851sGK 25.1-50 BAR 1/2" x 1"
757079 851sGK 0.5-50 BAR 3/4" x 1-1/4"
757080 851sGK 0.5-50 BAR 1" x 1-1/2"
757095 851sGK 0.5-50 BAR 1-1/4" x 2"
757096 851sGK 0.5-50 BAR 1-1/2" x 2"
757097 851sGK 0.5-50 BAR 2" x 2"
757098 851sGL 0.5-25 BAR 1/2" x 1/2"
757099 851sGL 0.5-25 BAR 1/2" x 1"
757109 851sGL 25.1-50 BAR 1/2" x 1"
757110 851sGL 0.5-50 BAR 3/4" x 1-1/4"
757119 851sGL 0.5-50 BAR 1" x 1-1/2"
757120 851sGL 0.5-50 BAR 1-1/4" x 2"
757132 851sGL 0.5-50 BAR 1-1/2" x 2"
757133 851sGL 0.5-50 BAR 2" x 2"
757134 851bGFK 0.5-25 BAR 1/2" x 1/2"
757086 851bGFK 0.5-25 BAR 1/2" x 1"
757135 851bGFK 25.1-50 BAR 1/2" x 1"
757087 851bGFK 0.5-50 BAR 3/4" x 1-1/4"
757088 851bGFK 0.5-50 BAR 1" x 1-1/2"
757089 851bGFK 0.5-50 BAR 1-1/4" x 2"
757136 851bGFK 0.5-50 BAR 1-1/2" x 2"
757137 851bGFK 0.5-50 BAR 2" x 2"
757138 851bGFL 0.5-25 BAR 1/2" x 1/2"
757091 851bGFL 0.5-25 BAR 1/2" x 1"
757139 851bGFL 25.1-50 BAR 1/2" x 1"
757092 851bGFL 0.5-50 BAR 3/4" x1-1/4"
757093 851bGFL 0.5-50 BAR 1" x 1-1/2"
757094 851bGFL 0.5-50 BAR 1-1/4" x 2"
757140 851bGFL 0.5-50 BAR 1-1/2" x 2"
757148 851bGFL 0.5-50 BAR 2" x 2"

Safety valves made of stainless steel, angle-type with threaded connections

The benefits and applications of this series made of high-alloyed stainless steel begin, where versions made of gunmetal are at their limits. The flexibility of the various versions offer the optimal configuration for every application.
In addition to the basic version the numerous sealing possibilities and materials, back-pressure compensating metal bellows and?/?or a gastight cap offer the necessary optional extras required to fulfill the highest safety requirements.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757256 451sGK 0.5-25 BAR 1/2" x 1/2"
757257 451sGK 0.5-25 BAR 1/2" x 1"
757258 451sGK 25.1-50 BAR 1/2" x 1"
757259 451sGK 0.5-50 BAR 3/4" x 1-1/4"
757260 451sGK 0.5-50 BAR 1" x 1-1/2"
757268 451sGK 0.5-50 BAR 1-1/4" x 2"
757269 451sGK 0.5-50 BAR 1-1/2" x 2"
757270 451sGK 0.5-50 BAR 2" x 2"
757278 451sGL 0.5-25 BAR 1/2" x 1/2"
757279 451sGL 0.5-25 BAR 1/2" x 1"757280 451sGL 25.1-50 BAR 1/2" x 1"
757281 451sGL 0.5-50 BAR 3/4" x 1-1/4"
757282 451sGL 0.5-50 BAR 1" x 1-1/2"
757283 451sGL 0.5-50 BAR 1-1/4" x 2"
757284 451sGL 0.5-50 BAR 1-1/2" x 2"
757285 451sGL 0.5-50 BAR 2" x 2"
757286 451bGFK 0.5-25 BAR 1/2" x 1/2"
757287 451bGFK 0.5-25 BAR 1/2" x 1"
757288 451bGFK 25.1-50 BAR 1/2" x 1"
757289 451bGFK 0.5-50 BAR 3/4" x 1-1/4"
757290 451bGFK 0.5-50 BAR 1" x 1-1/2"
757291 451bGFK 0.5-50 BAR 1-1/4" x 2"
757292 451bGFK 0.5-50 BAR 1-1/2" x 2"
757293 451bGFK 0.5-50 BAR 2" x 2"
757294 451bGFL 0.5-25 BAR 1/2" x 1/2"
757295 451bGFL 0.5-25 BAR 1/2" x 1"
757296 451bGFL 25.1-50 BAR 1/2" x 1"
757297 451bGFL 0.5-50 BAR 3/4" x 1-1/4"
757298 451bGFL 0.5-50 BAR 1" x 1-1/2"
757299 451bGFL 0.5-50 BAR 1-1/4" x 2"
757307 451bGFL 0.5-50 BAR 1-1/2" x 2"
757308 451bGFL 0.5-50 BAR 2" x 2"

Safety valves made of brass, atmospheric discharge, with threaded ­connection

The basic model within the range of small safety valves for compressed air. It is compact and due to its good blow-off capacities is particularly suitable for the protection of pressure vessels and compressors. However, even for large pressure vessels this valve can be employed due to its excellent price?/?performance ratio. This valve is equipped as standard with a stainless steel spring and FPM seal.

Examplesof use & Approvals see datasheet

IMPA Part No. Item Code
757309 810sGK 1/4" FKM
757310 810sGK 3/8" FKM
757317 810sGK 1/2" FKM
757318 810sGK 3/4" FKM
757319 810sGK 1" FKM
757320 810sGK 1/4" PTFE
757329 810sGK 3/8" PTFE
757330 810sGK 1/2" PTFE
757338 810sGK 3/4" PTFE
757339 810sGK 1" PTFE

Safety valves made of brass, atmospheric discharge, with threaded ­connection

Our smallest and most compact atmospheric discharge safety valve made completely of stainless steel with a stainless steel spring. Due to the huge blow-off capacity compared to its size, this valve can be used to protect high-performance compressors.
This safety valve is also ideally suited for the protection of large stainless steel pressure vessels and air systems made of stainless steel in aggressive environments or in clean-service areas.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757348 410sGK 1/4" FKM
757349 410sGK 3/8" FKM
757350 410sGK 1/2" FKM
757351 410sGK 3/4" FKM
757352 410sGK 1" FKM
757353 410sGK 1/4" PTFE
757354 410sGK 3/8" PTFE
757355 410sGK 1/2" PTFE
757356 410sGK 3/4" PTFE
757357 410sGK 1" PTFE

High performance safety valves made of brass, atmospheric discharge, with threaded connection

The basic model within the range of high performance safety valves. Up to date technology and highest precision, high-quality components such as a stainless spindle and spring fitted into a slender body made of brass. This valve is suitable for air and gaseous media up to a set pressure of 40 bar, which can be freely discharged into the atmosphere.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757358 812sGK 1/2"
757359 812sGK 3/4"
757360 812sGK 1"
757361 812sGK 1-1/4"
757362 812sGK 1-1/2"
757363 812sGK 2"

High performance safety valves made of stainless steel, atmospheric discharge, with threaded connection

This high performance safety valve made of stainless steel is unique in its class. Its slim and elegant exterior conceals the highest level ofprecision and performance. At the same time, this valve can be ordered with a set pressure up to 40 bar. It is suitable for air and gases which can be freely discharged into the environment.

Examples of use & Approvals see datasheet

IMPA PartNo. Item Code
757364 412sGK 1/2"
757365 412sGK 3/4"
757366 412sGK 1"
757367 412sGK 1-1/4"
757368 412sGK 1-1/2"
757369 412sGK 2"

Bracket Sump Sensor LCG-1040

Technical Data:
* Mounting Style: Brackt Mounting
* Slosh Shield Material: Acrylic 60x4(t)
* Float & Stem Material: SUS 316 & SUS 304
* Maximum Temperature: -20°C-80°C
* Maximum Pressure: 20 bar
* Float S.G.: 0.7
* Minimum Fluid S.G.:0.8

Electrical Data:
* Contact Form: N/O (N/C)
* Switching Power Max. VA: 50W(70VA)
* Switching Voltage AC Max. V: 240
* Switching Voltage DC Max. V: 200
* Switching Current Max. A: 0.5
* Electrical Termination: VDE H05SS FEP-Jacket Cable 1M

Safety valves made of gunmetal, angle-type with threaded connections

Efficiency was the main focus of this development. For the optimum protection of small steam generators, smaller sterilisers and autoclaves, compact and component tested safetyvalves in increasingly smaller nominal diameters are required in many cases. The tried and tested and versatile 851 series was therefore extended with additional smaller nominal diameters to meet the demands of the market.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757371 861sGK 0.5-50 BAR 1/4" x 1/2"
757372 861sGK 0.5-50 BAR 3/8" x 1/2"
757373 861sGK 0.5-50 BAR 1/2" x 1/2"
757374 861sGL 0.5-50 BAR 1/4" x 1/2"
757375 861sGL 0.5-50 BAR 3/8" x 1/2"
757376 861sGL0.5-50 BAR 1/2" x 1/2"
757377 861tGO 0.5-50 BAR 1/4" x 1/2"
757378 861tGO 0.5-50 BAR 3/8" x 1/2"
757379 861tGO 0.5-50 BAR 1/2" x 1/2"
757380 861tFO 0.5-50 BAR 1/4" x 1/2"
757381 861tFO 0.5-50 BAR 3/8" x 1/2"
757382 861tFO 0.5-50 BAR 1/2" x 1/2"757383 861tGFO 0.5-50 BAR 1/4" x 1/2"
757384 861tGFO 0.5-50 BAR 3/8" x 1/2"
757385 861tGFO 0.5-50 BAR 1/2" x 1/2"

Safety valves made of stainless steel, angle-type with threaded connections

The consequential expansion of the valve series 451 with smaller nominal diameters now allows the best and therefore most efficient design of safety valves with smaller discharge volumes.
The proven versatility in different variations leads to use for a variety of media with different aggregate conditions. The possibilities for use are in medical process equipment construction and in the food, beverage, pharmaceutical and cosmetics industries in secondary areas.

Examples of use & Approvals see datasheet

IMPA Part No. Item Code
757386 461sGK 0.5-70 BAR 1/4" x 1/2"
757387 461sGK 0.5-70 BAR 3/8" x 1/2"
757388 461sGK 0.5-70 BAR 1/2" x 1/2"
757389 461sGL 0.5-70 BAR 1/4" x 1/2"
757390 461sGL 0.5-70 BAR 3/8" x 1/2"
757391 461sGL 0.5-70 BAR 1/2" x 1/2"
757392 461tGO 0.5-70 BAR 1/4" x 1/2"
757393 461tGO 0.5-70 BAR 3/8" x 1/2"
757394 461tGO 0.5-70 BAR 1/2" x 1/2"
757395 461tFO 0.5-70 BAR 1/4" x 1/2"757396 461tFO 0.5-70 BAR 3/8" x 1/2"
757397 461tFO 0.5-70 BAR 1/2" x 1/2"
757398 461tGFO 0.5-70 BAR 1/4" x 1/2"
757399 461tGFO 0.5-70 BAR 3/8" x 1/2"
757400 461tGFO 0.5-70 BAR 1/2" x 1/2"

SPECIFIEKE INFORMATIE OVER ONS BEDRIJF OF ONZE PRODUCTEN? BEL +31 174 280 371!