ASSORTIMENT

Stoom water

Ultrasonic leak detector

To detect leaks: In condensate purgers. In valve seals. Checking for wear on bearings. Solving mechanical problems in general. Ultrasound is directional and localisable. In a noisy environment we can remove or block the distorting ultrasounds. During preventive maintenance, we should place the stethoscope properly and we will detect, audibly and visually, the leaks that are aff ecting us. We can take corrective action, safeguarding the environment, saving energy, time and consequently money. It meets and exceeds the requirements of ASTM E1002-2005 for Leak Detection.

For visual checking of the level of liquids in all types of vessel, including those under pressure, in special thermal and chemical conditions. Also for checking processes.
The quality of the sight glass satisfi es the most demanding safety standards and industry guarantees in general.

Siphon tube. For pressure gauges

Prevents breakdowns and misalignments in pressure gauges.
Absorbs abrupt pressure changes or water hammer which cause malfunctioning pressure gauges.

Isolates the pressure gauge from extreme temperatures by creating thermal isolation space.
If working with steam, ensure that the pressure gauge is activated by water condensation and not by steam.

Thermodynamic steam trap without filter

For the extraction of steam condensates.

For use in:
* steam piping
* irons
* laundries
* tanks and vessels with condensate discharge
* multiple plate presses
* vulcanizing autoclaves
* pressurereduction equipment

Thermodynamic steam trap without filter

For the extraction of steam condensates.

For use in:
* steam piping
* irons
* laundries
* tanks and vessels with condensate discharge
* multiple plate presses
* vulcanizing autoclaves
* pressurereduction equipment

Thermodynamic steam trap without filter

For the extraction of steam condensates.

For use in:
* steam piping
* irons
* laundries
* tanks and vessels with condensate discharge
* multiple plate presses
* vulcanizing autoclaves
* pressurereduction equipment

Thermodynamic steam trap without filter

For the extraction of steam condensates. For use in: steam piping, irons, laundries, tanks and vessels with condensate discharge, multiple plate presses, vulcanizing autoclaves, pressure reduction equipment, etc.

Bimetallic steam trap

For the extraction of steam condensates. Applicable in: steam piping, heat exchangers, chemical and petrochemical industries,... etc.

Bimetallic steam trap

For the extraction of steam condensates. Applicable in: steam piping, heat exchangers, chemical and petrochemical industries,... etc.

Needle valve

For liquids, gases and steam.

For use in:
* hydraulic
* pneumatic
* heating and steam systems
* chemical and food industries

To control the level of liquids in tanks, deposits, etc.

* Simplicity of construction ensuring minimum maintenance
* Guarantees absolute opening and closing precision
* Materials carefully selected for their resistnace to corrosion
* Fully constructed from laminated bars
* All valves undergo thorough testing

To control the level of liquids in tanks, deposits, etc.

* Simplicity of construction ensuring minimum maintenance
* Guarantees absolute opening and closing precision
* Materials carefully selected for their resistnace to corrosion
* Fully constructed from laminated bars
* All valves undergo thorough testing

Entirely Stainless steel (EN-1.4401). Finished: Glass-ball blast

Disc check valve

Disc check valve with centering ring for placing between fl anges in accordance with DIN, UNE, ANSI, BS, etc. DN -15 to 100.

Face-to-face dimmensions in accordance with EN- 558, basic series 49.

Disc check valve

Disc check valve with centering ring for placing between fl anges in accordance with DIN, UNE, ANSI, BS, etc. DN -15 to 100.

Face-to-face dimmensions in accordance with EN- 558, basic series 49 and 51.

Piston check valve

Check valve with spring operated piston closure.

Float and thermostatic steam trap

To extract saturated or super-heated medium or lowpressure steam condensates. Applicable to: steam piping, heat exchangers, plants with automatic temperature control, etc., in the chemical and petrochemical industries, etc.

Float and thermostatic steam trap

To extract saturated or super-heated medium or lowpressure steam condensates. Applicable to: steam piping, heat exchangers, plants with automatic temperature control, etc., in the chemical and petrochemical industries, etc.

Float and thermostatic steam trap

To extract saturated or super-heated medium or lowpressure steam condensates. Applicable to: steam piping, heat exchangers, plants with automatic temperature control, etc., in the chemical and petrochemical industries, etc.

Steam-water mixing valve

In installations with steam, the steam can be mixed with cold water to obtain instant hot water in the most economical way.
Can be used in packaging plants, dairies, detergent plants, slaughterhouses, meat processing plants, hospitals,... etc.

For cleaning floors, vehicles, toilets, tanks, filters,... etc.
In the manufacture of food, chemical, paper and tannery products,... etc.

Inverted bucket steam trap

To extract saturated or super-heated medium or lowpressure steam condensates. Applicable to: steam piping, heat exchangers, plants with automatic temperature control, etc., in the chemical and petrochemical industries,etc.

Thermostatic steam trap

To extract saturated or super-heated medium or low-pressure steam condensates.

Applicable to:
* steam piping
* irons
* laundries
* vessels with condensate discharge
* cooking pots
* sterilizers
* heat exchangers* multiple dish presses
* vulcanizing autoclaves
* calenders
* pressure reducing equipment

Thermostatic steam trap

To extract saturated or super-heated medium or low-pressure steam condensates.

Applicable to:
* steam piping
* irons
* laundries
* vessels with condensate discharge
* cooking pots
* sterilizers
* heat exchangers* multiple dish presses
* vulcanizing autoclaves
* calenders
* pressure reducing equipment

Direct action pressure reducing valve

In installations with steam, the steam can be mixed with cold water to obtain instant hot water in the most economical way.
Can be used in packaging plants, dairies, detergent plants, slaughterhouses, meat processing plants, hospitals,... etc.

For cleaning floors, vehicles, toilets, tanks, filters,... etc.
In the manufacture of food, chemical, paper and tannery products,... etc.

Direct action pressure reducing valve

For steam and gases. (For liquids, consult our technical department).
Suitable for application in: ironing machines, laundries and dry cleaners’, cooking vats, textile machinery, drying cylinders, autoclaves, steam ovens, distilleries, heat exchangers, the food industry, chemical laboratories, etc

Thermostatic steam trap

To extract saturated or super-heated medium or low-pressure steam condensates.

Applicable to:
* steam piping
* irons
* laundries
* vessels with condensate discharge
* cooking pots
* sterilizers
* heat exchangers* multiple dish presses
* vulcanizing autoclaves
* calenders
* pressure reducing equipment

Steam or water jet injector

Body:
* Nodular GGG40.3 (standard)
* Bronze RG10
* Stainless steel AISI 316

Nozzle:
* Bronze RG-10 (standard)
* Stainless Steel AISI 316
* Monel

Connection:
Standard construction Flanges DIN PN16.
Other connection, consult it.

Liquid ejector

Body:
* Nodular GGG40.3 (standard)
* Bronze RG10
* Stainless steel AISI 316

Nozzle:
* Bronze RG-10 (standard)
* Stainless Steel AISI 316
* Monel

Connection:
Standard construction flanges

Reheater

Body:
* Nodular GGG40.3 (standard)
* Bronze RG10
* Stainless steel AISI 316

Nozzle:
* Bronze RG-10 (standard)
* Stainless Steel AISI 316
* Monel

Connection:
Standard construction flanges DIN PN16

Reheater

Body:
* Nodular GGG40.3 (standard)
* Bronze RG10
* Stainless steel AISI 316

Nozzle:
* Bronze RG-10 (standard)
* Stainless Steel AISI 316
* Monel

Connection:
Standard construction flanges DIN PN16

Reheater

Materials:
Stainless Steel AISI316.

Reheater

Body:
* Nodular GG40.3 (standard)
* Bronze RG10
* Stainless Steel AISI 316

Nozzle:
* Bronze RG-10 (standard)
* Stainless Steel

Full lift safety valve with spring loading (AIT)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open instantly and totally.

* Design in accordance with "ASME code section VIII Div.1".
* Materials according ASME code section II and ASTM.
* Connections according ASME B1.20.1 standard.

Full lift safety valve with spring loading (AIT)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open instantly and totally.

Design in accordance with "ASME code section VIII Div.1".
Materials according ASME code section II and ASTM.
Connections according ASME/ANSI B16.5 standard.
Center to face dimensions according API-526

Sliding buoy type automatic level controller

Blowdown valve for bleeding dirt and sludge For steam boilers

The water in the boiler contains salts, which are built up by the continuous evaporation. If these salts are not eliminated, bubbles and foam are formed when the density of the water increased.
To prevent these lime deposits forming, the water supply must be suitably treated, with the result that certain salts are changed producing impurities which form sludge and encrusted deposits which then adhere to the sides or the bottom ofthe boiler and to the combustion tubes, together with particles of dirt, remains of electrodes, carbonic acid, oxygen, etc.

This leads to a high level of rust which may:
* Destroy the metal plate of the boiler, causing high maintenance costs.
*Produce thermic voltages, causing cracks in the metal plate and soldering cord.
* Notably slow down thermic transmission, meaning an unnecessary and excessive consumption of fuel.

To verify the flow, direction and condition of liquid in a section of piping. It helps detect blockages in valves, filters and other line equipment. In particular, it enables verifi cation of correct operation of the condensate traps, ensuring thatthere are no steam leaks, with the cost this would entail. It also enables observation of a product’s viscosity, turbidity and, in particular, its colour in the diff erent phases of its production process.

Applicable to:
* piping conveying liquids
* steam and condensates
* among others

In any type of industry: chemical, petrochemical, pharmaceutical, food and more.

Full lift safety valve with spring loading (AIT)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open instantly and totally.

Design in accordance with "International Standard ISO 4126-1 Safety Valves".

Full lift safety valve with spring loading (AIT)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open instantly and totally.

Design in accordance with "International Standard ISO 4126-1 Safety Valves".

Blowdown valve for bleeding dirt and sludge. For steam boilers

The water in the boiler contains salts, which are built up by the continuous evaporation. If these salts are not eliminated, bubbles and foam are formed when the density of the waterincreased.
To prevent these lime deposits forming, the water supply must be suitably treated, with the result that certain salts are changed producing impurities which form sludge and encrusted deposits which then adhere to the sides or the bottom of the boiler and to the combustion tubes, together with particles of dirt, remains of electrodes, carbonic acid, oxygen, etc.

This leads to a high level of rust which may:
* Destroy the metal plate of the boiler, causing high maintenance costs.* Produce thermic voltages, causing cracks in the metal plate and soldering cord.
* Notably slow down thermic transmission, meaning an unnecessary and excessive consumption of fuel.

Magnetic switch

To verify the flow, direction and condition of liquid in a section of piping. It helps detect blockages in valves, filters and other line equipment. In particular, it enables verification of correct operation of the condensate traps, ensuring that there are no steam leaks, with the cost this would entail. It also enables observation of a product’s viscosity, turbidity and, in particular, its colour in the different phases of its production process.

Applicable to:
* piping conveying liquids* steam and condensates
* among others

In any type of industry: chemical, petrochemical, pharmaceutical, food and more.

Full lift safety valve with spring loading (AIT)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open instantly and totally.

Design in accordance with "International Standard ISO 4126-1 Safety Valves".

The product data sheet is not yet available.

Full lift safety valve with spring loading (AIT)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open instantly and totally.

Design in accordance with "International Standard ISO 4126-1 Safety Valves".

The product data sheet is not yet available.

Normal safety valve (AN)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open, at the fi rst proportional to the pressure increase, and after instantly and totally.

Design in accordance with "International Standard ISO 4126-1 Safety Valves".

Sliding buoy type automatic level controller

Specification
* Materials carefully selected for their resistance to wear and tear, temperature and corrosion
* Simplicity of construction ensuring minimim maintance
* The area of connectors, terminals, magnetic switches, etc., housed in a box made of isolating temperature resstant material wich prevents the entry of dust or dirt, etc. IP-65 protection
* The components of the magnetic switch are rigorously selected to gurantee long life and total operating safety
* Easy to connect
* Adjustment of operating points using end stops
* All of the equipment and the switches have been thoroughly tried and tested
* Each of the components is numbered, registered and checked. If prior request is made a certificate of materials, batch and will be supplied

To verify the flow, direction and condition of liquid in a section of piping. It helps detect blockages in valves, filters and other line equipment. In particular, it enables verification of correct operation of the condensate traps, ensuring that there are no steam leaks, with the cost this would entail. It also enables observation of a product’s viscosity, turbidity and, in particular, its colour in the different phases of its production process.

Applicable to:
* piping conveying liquids* steam and condensates

In any type of industry: chemical, petrochemical, pharmaceutical, food and more.

Blowdown valve for bleeding dirt and sludge. For steam boilers.

The water in the boiler contains salts, which are built up by the continuous evaporation. If these salts are not eliminated, bubbles and foam are formed when the density of the waterincreased.
To prevent these lime deposits forming, the water supply must be suitably treated, with the result that certain salts are changed producing impurities which form sludge and encrusted deposits which then adhere to the sides or the bottomof the boiler and to the combustion tubes, together with particles of dirt, remains of electrodes, carbonic acid, oxygen, etc.

This leads to a high level of rust which may:
* Destroy the metal plate of the boiler, causing high maintenance costs.* Produce thermic voltages, causing cracks in the metal plate and soldering cord.
* Notably slow down thermic transmission, meaning an unnecessary and excessive consumption of fuel.

Multi-stage diffusion silencers

During the expansion process for compressible substances such as gases, steam or air, one of the main problems is noise pollution. The noise is caused by opening the valve and discharging the expanded fluid at thespeed of sound.

Silencers are a great way to reduce this noise, caused by discharging the valve, bringing it down to allowable levels. They are used in places such as power, chemical and petrochemical plants to discharge safety valves, control valves, etc. in pressure lines and equipment that convey compressible substances such as steam, air, carbon dioxide, helium, methane, nitrogen, oxygen and other gases.

They achieve noise reductions of more than 50 dB without any additional acoustic absorption materials.

Full lift safety valve with spring loading (AIT)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open instantly and totally.

* Design in accordance with "ASME code section VIII Div.1".
* Materials according ASME code section II and ASTM.
* Connections according ASME B1.20.1 standard.

Sliding buoy type automatic level controller

* Materials carefully selected for their resistance to wear and tear, temperature and corrosion
* Simplicity of construction ensuring minimim maintance
* The area of connectors, terminals, magnetic switches, etc., housed in a box made of isolating temperature resstant material wich prevents the entry of dust or dirt, etc. IP-65 protection
* The components of the magnetic switch are rigorously selected to gurantee long life and total operating safety
* Easy to connect
* Adjustment of operating points using end stops
* All of the equipment and the switches have been thoroughly tried and tested
* Each of the components is numbered, registered and checked. If prior request is made a certificate of materials, batch and will be supplied

The continuous desalting valve is used to empty an adjustable quantity of water from the steam boiler

The continuous desalting valve is used to empty an adjustable quantity of water from the steam boiler, removing:
* Organic matter and mineral salts in solution. (Calcium, magnesium, sodium, potassium, iron, bicarbonate ions, chlorides, sulphates, nitrates, ...etc.).
* Solid materials in suspension. (Sand, clay, metal residues, rock residues, organic matter, ...etc.).

The continuous bleeding process prevents:
* Damage caused by erosion and perforation, entailing the following high costs:
** Direct: Replacement or repair of materials.
** Indirect: Stoppages, product losses, ...etc.
** Danger of boiler explosion.

And reduces:** Incrustations and sediments caused by precipitation of calcium and magnesium salts, which obstruct thermic transmission and which cause unnecessary and excessive fuel consumption.
** Foam formation caused by excessive saline concentration, with its corresponding drag.

Full lift safety valve with spring loading (AIT)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open instantly and totally.

* Design in accordance with "International Standard ISO 4126-1 Safety Valves".

Full lift safety valve with spring loading (AIT)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open instantly and totally.

* Design in accordance with "ASME code section VIII Div.1".
* Materials according ASME code section II and ASTM.
* Connections according ASME B1.20.1 standard.

Full lift safety valve with spring loading (AIT)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open instantly and totally.

* Design in accordance with "International Standard ISO 4126-1 Safety Valves".

For use in boilers, receivers, cisterns, reservoirs, ...etc., to control the level of liquids, gases and steam.
A multiple-slot polyprismatic viewer allows the level to be optically read, clearly differentiating liquid and gas phases from liquid ones.

Electrode based electronic level controller. For steam boilers

* The electrode design is technically perfect, being fully tightness in steam, with several sealing points
* Simplicity of construction, eliminating the need for moving mechanical parts, wich leads to minimum maintance
* Materials carefully selected for their resistance to wear, temperature and corrosion
* Ease of connection and adjustment of operating points. Being a fixed installation greatly inhibits any type of manipulation
* High reliability and safety wich allows operation of s team boilers without permanent supervision
* Through the elimination of unnecessart equipment and the direct installation of the electrode in the boiler body a maintance free installationis obtained, with the corresponding finacial savings
* Centralized control and possibility of executing complex regulation and control
* All controllers and electrodes are rigorously tested and verified
* Each of the components is nimbered, registerd and checked. If prior request is made a certificates of materials, batch and tests will be supplied

Automatic continuous desalting valve For steam boilers

The conductivity electrode EC-1, the desalting controller RD-1 and the continuous desalting valve with servomotor allow the automatic desalting process of boiler water which eliminates:
* Organic matter and mineral salts in solution. (Calcium, magnesium, sodium, potassium, iron, bicarbonate ions, chlorides, sulphates, nitrates, ...etc.).
* Solid materials in suspension. (Sand, clay, metal residues, rock residues, organic matter, ...etc.).

The continuous bleeding process prevents:
* Damage caused by erosion and perforation, entailing the following high costs:
** Direct: Replacement or repair of materials.
** Indirect: Stoppages, product losses, ...etc.
** Danger of boiler explosion.

And reduces:
** Incrustations and sediments caused by precipitation of calcium and magnesium salts, which obstruct thermic transmission and which cause unnecessary and excessive fuel consumption.
** Foam formation caused by excessive saline concentration, with its corresponding drag.

This combination of measuring, comparison and control ensures minimum water loss and thus gives considerate energy savings.

Full lift safety valve with spring loading (AIT)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open instantly and totally.

* Design in accordance with "ASME code section VIII Div.1".
* Materials according ASME code section II and ASTM.
* Connections according ASME B1.20.1 standard.

Full lift safety valve with spring loading (AIT)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open instantly and totally.

* Design in accordance with "International Standard ISO 4126-1 Safety Valves".

For use in boilers, receivers, cisterns, reservoirs, ...etc., to control the level of liquids, gases and steam.
A multiple-slot polyprismatic viewer allows the level to be optically read, clearly differentiating liquid and gas phases from liquid ones.

Modulating electrode based electronic level controller. For steam boilers

* The design of the electrodes is technically perfect, achieving total steam-proofing with several sealing points
* Simple contrstuction eliminating mechanical moving parts, so the require minimum maintenance
* Materials carefully selected for their resistance to wer, temperature and corrosion
* Given their solid construction, the electrodes can work under critical pressure and temperature conditions
* Very easy toconnect and adjust for the control points. Since it is a fixed installation it makes any kind of handling much more difficult
* High level of reliability and safety wich allows them, in steam boilers, to work without permanent surveillance
* By removing unnecessary support equpment and by installing the electrodes directly into the boiler, it achieves a completly maintenance free control system, with the resulting cash savings
* Centralised control of possibility of performing complex controls and adjustments
* All the control units and electrodes are strictly teste and checked
* Each one of the components is given a serial number, registered and controlled. If requested beforehand, the quipment will come with the certificates fo rmaterials, casting and trials

Full lift safety valve with spring loading (AIT)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open instantly and totally.

* Design in accordance with "ASME code section VIII Div.1".
Materials according ASME code section II and ASTM. Connections according ASME ISO 2852 standard.

Samples water-cooler For steam boilers

Efficient monitoring of the purging of salts, dirt and sludge in a steam boiler requires regular analysis of the water in order to verify that its parameters are within the ideal levels af salinity and alkalinity demanded by law.
All the Continuous desalting valve (Mod. 560 and 560-A) are provided with taps for obtaining samples. As the water is extracted continuously 30 ÷ 50 mm. below the minimum level, the collection level is ideal and does not interfere with the control and level regulation devices.

Direct sampling is incorrect:
* Losses by expansion increase the density of the water and falsify results.
* There is an obvious physical risk involved.

The basic premise for conducting analyses correctly is to bring the samples from the tap of the Continuous desalting valve to the Samples water-cooled DRM-1, and bring them down to between 24 ÷ 26°C.

Controlled safety pressure relief system

Controlled safety pressure relief system CSPRS valves are mainly used where conventional direct-loaded spring action valves cannot guarantee the opening and closing margins that certain specifi c conditions of service demand.
The objective is to help the closure by means of pressure so that the valve remains completely watertight until reaching the set pressure and/or to activate the opening with pressure.

Once evacuated and in keeping with a previous adjustment, to assist with closing pressure, to once again achieve closure with the desired watertightness.

This allows us to:
* Stabilise the functioning in critical applications of one or several valves.
* Improve performance, position, repeatability and operational effi ciency.
* Improve the opening-closure hysteresis.
* Reduce product losses and minimise them in the case of working with several valves at staggered pressures, if conditions so permit.
* Increase the operating pressure of the system up to 99.9% of the set pressure.The control safety pressure relief system CSPRS device can be used with any safety valve available in the market and in particular, with models VYC Mod. 485, 486, 494, 495 and 496.

Normal safety valve with spring loading (AN)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open, at the fi rst proportional to the pressure increase, and after instantly and totally.

Design in accordance with "International Standard ISO 4126 -1 Safety Valves".

For use in boilers, receivers, cisterns, reservoirs, ...etc., to control the level of liquids, gases and steam.
A multiple-slot polyprismatic viewer allows the level to be optically read, clearly differentiating liquid and gas phases from liquid ones.

Normal safety valve with spring loading (AN)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open, at the fi rst proportional to the pressure increase, and after instantly and totally.

Design in accordance with "International Standard ISO 4126 -1 Safety Valves".

Proportional safety valve with spring loading (AP)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open proportional to thepressure increase.

Design in accordance with "International Standard ISO 4126 -1 Safety Valves".

Reflection and transparency glasses For level indicator box

For visual checking of the level of liquids in all types of vessel, including those under pressure, in special thermal and chemical conditions. Also for checking processes.
The qualityof the sight glass satisfies the most demanding safety standards and industry guarantees in general.

Proportional safety valve with spring loading (AP)

The valve works as an automatic pressure releasing regulator activated by the static pressure existing at the entrance to the valve and is characterized by its ability to open proportional to thepressure increase.

Design in accordance with "International Standard ISO 4126 -1 Safety Valves".

For use in boilers, receivers, cisterns, reservoirs, ...etc., to control the level of liquids, gases and steam.
A multiple-slot polyprismatic viewer allows the level to be optically read, clearly differentiating liquid and gas phases from liquid ones.

Vacuum breaker safety valve

The valve acts as an automatic regulator of pressure drops and prevents the creation of a vacuum inside pressurised installations or vessels.

Vacuum breaker safety valve

The valve acts as an automatic regulator of pressure drops and prevents the creation of a vacuum inside pressurised installations or vessels.

In combination with transparent glasses the life of these is increased when working at high pressures and temperatures.
Also, they are protected from erosion, which results from the eff ects of the corrosive chemical components, alkaline solutions,boiler water, steam, caustic products, hydrofluoric acids, hot and concentrated phosphoric acids, sodium and potassium hydroxides and other contaminating, viscous or corrosive media.

Applicable in level indicators for electrical generation plants, thermal power plants, petroleum refineries, petrochemical plants, pressure vessels, fertilizers, sugar refining plants, paper mills,... etc..

Blowoff valve

SPECIFIEKE INFORMATIE OVER ONS BEDRIJF OF ONZE PRODUCTEN? BEL +31 174 280 371!